| PART 1 - GENERAL |
| |
| 1.01 SUMMARY |
| |
| |
A. |
Section Includes: Simulated wood trim, including
entrance systems, large entrance features, specialty entrance
features, moldings, door and window trim, wall niches, window
features, ornamentation and decorations, medallions and domes. |
| |
B. |
Related Sections: Section(s) related to this
section include: |
| |
|
1. |
Carpentry (Rough and Finish): Division 6 Carpentry
Sections. |
| |
|
2. |
Architectural Woodwork: Division 6 Architectural
Woodwork Section. |
| |
|
3. |
Painting: Division 9 Painting Section. |
| |
| 1.02 REFERENCES |
| |
| |
A. |
American Society for Testing and Materials (ASTM):
ASTM E84- Standard Test Method for Surface Burning Characteristics
of Building Materials. |
| |
| 1.03 SYSTEM DESCRIPTION |
| |
| |
A. |
Performance Requirements: Provide simulated wood
trim units which have been manufactured, fabricated and installed
to maintain performance criteria stated by manufacturer without
defects, damage or failure. |
| |
B. |
Fire-Test Characteristics: Test method units per
ASTM E84 for Class A requirement by UL or other testing and
inspecting agency acceptable to authorities having jurisdiction. |
| |
| 1.04 SUBMITTALS |
| |
| |
A. |
General: Submit listed submittals in accordance
with Conditions of the Contract and Division 1 Submittal Procedures
Section. |
| |
B. |
Product Data: Submit product data, including manufacturer's
product sheet, for specified products. |
| |
C. |
Samples: Submit selection and verification samples
for finishes, colors and textures. |
| |
D. |
Manufacturer's Instructions: Manufacturer's installation
instructions. |
| |
E. |
Closeout Submittals: Submit the following: |
| |
|
1. |
Warranty: Warranty documents specified herein. |
| |
| 1.05 QUALITY ASSURANCE |
| |
| |
A. |
Installer Qualifications: Installer experienced
in performing work of this section who has specialized in installation
of work similar to that required for this project. |
| |
B. |
Regulatory Requirements: (Specify applicable requirements
of regulatory agencies). |
| |
| 1.06 DELIVERY, STORAGE & HANDLING |
| |
| |
A. |
General: Comply with Division 1 Product Requirements
Sections. |
| |
B. |
Ordering: Comply with manufacturer's ordering
instructions and lead time requirements to avoid construction
delays. |
| |
C. |
Delivery: Deliver materials in manufacturer's
original, unopened, undamaged containers with identification
labels intact. |
| |
D. |
Storage and Protection: Store materials protected
from exposure to harmful weather conditions and at temperature
and humidity conditions recommended by manufacturer |
| |
| 1.07 PROJECT CONDITIONS |
| |
| |
A. |
Temperature Requirements: Maintain air temperature
in spaces where products will be installed for time period before,
during and after installation as recommended by manufacturer. |
| |
B. |
Field Measurements: Verify actual measurements/openings
by field measurements before fabrication; show recorded measurements
on shop drawings. Coordinate field measurements and fabrication
schedule with construction progress to avoid construction delays. |
| |
| 1.08 WARRANTY |
| |
| |
A. |
Project Warranty: Refer to Conditions of the Contract
for project warranty provisions. |
| |
B. |
Manufacturer's Warranty: Submit, for Owner's acceptance,
manufacturer's standard warranty document executed by authorized
company official. Manufacturer's warranty is in addition to,
and not a limitation of, other rights Owner may have under Contract
Documents. |
| |
|
1. |
Warranty Period: (Specify Term) years commencing
on Date of Substantial Completion. |
| |
| 1.09 MAINTENANCE |
| |
| |
A. |
Extra Materials: Deliver to Owner extra materials
from same production run as products installed. Package products
with protective covering and identify with descriptive labels.
Comply with Division 1 Closeout Submittals (Maintenance Materials)
Section. |
| |
|
1. |
Quantity: Furnish quantity of (identify items)
units equal to (specify %) of amount installed. |
| |
|
2. |
Delivery, Storage and Protection: Comply with
Owner's requirements for delivery, storage and protection of
extra materials. |
| |
| PART 2 - PRODUCTS |
| |
| 2.01 SIMULATED WOOD TRIM |
| |
| |
A. |
Manufacturer: Melton Classics Incorporated |
| |
|
1. |
Melton Classics Incorporated
P.O. Box 465020
Lawrenceville, GA 30042
770-963-3060
800-963-3060
FAX 770-962-6988
www.meltonclassics.com |
| |
B. |
Proprietary Product(s): Architectural Urethane™
Millwork |
| |
C. |
Entrance Systems Units: |
| |
|
1. |
Units: |
| |
|
|
a. |
Product Model Number/Product Name: (Specify) |
| |
|
|
b. |
Dimensions (Depth, Projection, Face Dimension): (Specify) |
| |
|
|
c. |
Product Material (Specify) |
| |
D. |
Large Entrance Features Units: |
| |
|
1. |
Units: (Pediments; Mantels; Pediment/Mantel;
Ram's Head) |
| |
|
|
a. |
Product Model Number/Product Name: (Specify) |
| |
|
|
b. |
Dimensions (Depth, Projection, Face Dimension): (Specify) |
| |
|
|
c. |
Product Material: (Specify) |
| |
E. |
Specialty Entrance Features Units: |
| |
|
1. |
Units: (Victorian Pediments; Colonial Pediments;
Segment Head; Arches; Brackets; Elliptical Sunburst Entrance;
Box Half Circle Entrance; Victorian Mantel; Door Treatment) |
| |
|
|
a. |
Product Model Number/Product Name: (Specify) |
| |
|
|
b. |
Dimensions (Depth, Projection, Face Dimension): (Specify) |
| |
|
|
c. |
Product Material: (Specify) |
| |
F. |
Moldings Units: |
| |
|
1. |
Units: (Specify Molding Type/Name; Dentil; Fascia;
Crown; Step Molding; Window/Door Trim; Boards; Small Moldings;
Scallop; Cove; Deco Moldings; Quoins) |
| |
|
|
a. |
Product Model Number/Product Name: (Specify) |
| |
|
|
b. |
Dimensions (Depth, Projection, Face Dimension): (Specify) |
| |
|
|
c. |
Product Material: (Specify) |
| |
G. |
Door and Window Trim Units: |
| |
|
1. |
Units: (Specify Unit Type/Name) |
| |
|
|
a. |
Product Model Number/Product Name: (Specify) |
| |
|
|
b. |
Dimensions (Depth, Projection, Face Dimension): (Specify) |
| |
|
|
c. |
Product Material: (Specify) |
| |
H. |
Wall Niches Units: |
| |
|
1. |
Units: (Specify Unit Type/Name) |
| |
|
|
a. |
Product Model Number/Product Name: (Specify) |
| |
|
|
b. |
Dimensions (Depth, Projection, Face Dimension): (Specify) |
| |
|
|
c. |
Product Material: (Specify) |
| |
I. |
Window Features Units: |
| |
|
1. |
Units: (Window Panels; Window/Door Panels; Half
Circles/Segments) |
| |
|
|
a. |
Product Model Number/Product Name: (Specify) |
| |
|
|
b. |
Dimensions (Depth, Projection, Face Dimension): (Specify) |
| |
|
|
c. |
Product Material (Specify) |
| |
J. |
Ornamentation and Decorations Units: |
| |
|
1. |
Units: (Shutters; Arch Surrounds/Eye Brows; Elliptical
Arches; Half Circle Jambs; Gable Decorations; Louvers; Rosettes;
Turnings; Golf Balls; Medallions/Domes; Keystones; Brackets) |
| |
|
|
a. |
Product Model Number/Product Name: (Specify) |
| |
|
|
b. |
Dimensions (Depth, Projection, Face Dimension): (Specify) |
| |
|
|
c. |
Product Material (Specify) |
| |
K. |
Shop Finish: Provide molded units with manufacturer's
standard primed finish to receive field applied coating. |
| |
|
1. |
Field Applied Coating: Refer to Division 9 Painting
Section for materials. |
| |
| 2.02 PRODUCT SUBSTITUTIONS |
| |
| |
A. |
Substitutions: No substitutions permitted. |
| |
| 2.03 ACCESSORIES |
| |
| |
A. |
Accessory Materials: |
| |
|
1. |
Fasteners: As recommended by molded unit manufacturer,
provide trim screws, drywall screws or finishing nails. |
| |
|
2. |
Joint Compound: As recommended by molded unit
manufacturer, provide spackle joint compound, ready-mixed, vinyl
type. |
| |
|
3. |
Adhesive: Use manufacturer recommended adhesive
for product installation. |
| |
| 2.04 RELATED MATERIALS |
| |
| |
A. |
Related Materials: Refer to other sections listed
in Part 1 Related Section for related materials. |
| |
| 2.05 SOURCE QUALITY |
| |
| |
A. |
Source Quality: Obtain Architectural Urethane
Millwork |
| |
B. |
Fabrication Tolerances: (Specify applicable fabrication
tolerances for specified products) |
| |
| PART 3 - EXECUTION |
| |
| 3.01 MANUFACTURER'S INSTRUCTIONS |
| |
| |
A. |
Compliance: Comply with manufacturer's product
data, including product bulletins, product catalog installation
instructions and product carton instruction for installation. |
| |
| 3.02 EXAMINATION |
| |
| |
A. |
Site Verification of Conditions: Verify substrate
conditions, which have been previously installed under other
sections, are acceptable for product installation in accordance
with manufacturer's instructions. |
| |
| 3.03 PREPARATION |
| |
| |
A. |
Surface Preparation: (Specify applicable product
preparation requirements). |
| |
| 3.04 INSTALLATION |
| |
| |
A. |
Simulated Wood Trim Installation: (Specify installation
requirements of units specified in Part 2 Products). |
| |
B. |
Field Applied Coating: (Specify installation
of field applied finishes coordinated with other sections) |
| |
|
1. |
Field Applied Coating: Refer to Division 9 Painting
Section for materials. |
| |
C. |
Related Products Installation: Refer to other
sections listed in Part 1 Related Sections for related products
installation. |
| |
| 3.05 FIELD QUALITY REQUIREMENTS |
| |
| |
A. |
Manufacturer's Field Services: Upon Owner's request,
provide manufacturer's field service consisting of product use
recommendations and periodic site visits for inspection installation
in accordance with manufacturer's instructions. |
| |
|
1. |
Site Visits: (Specify
number and duration of periodic site visits) |
| |
| 3.06 CLEANING |
| |
| |
A. |
Cleaning: Remove temporary coverings and protection
of adjacent work areas. Repair or replace damaged installed
products. Clean installed products in accordance with manufacturer's
instructions prior to Owner's acceptance. Remove construction
debris from project site and legally dispose of debris. |
| |
| 3.07 PROTECTION |
| |
| |
A. |
Protection: Protect installed product and finish
surfaces from damage during construction. |
